Sony a6400 Mirrorless Camera - Manual (Page 42)

42
Selecting the file format and recording format
Set the file format in (REC/OUT SET)
t [REC SET] t [FILE FORMAT] and
the recording format (bit rate, picture size,
frame rate, scanning method) in
(REC/
OUT SET) t [REC SET] t [REC
FORMAT] (p. 114).
To use the MPEG HD recording function,
“CBKZ-SLMP” (sold separately) is
required.
After purchasing an option, connect the
camcorder to a computer using USB to use
the auto detect function, and install by
following the instructions on the PC.
You can select the output for the video
signal when recording in XAVC QFHD.
1
Press the MENU button.
2
Select (REC/OUT SET) t
[VIDEO OUT] t [OUTPUT
SELECT] t [QFHD REC
OUTPUT].
3
Select the output destination.
VF/LCD PANEL
Output to viewfinder/LCD screen.
EXTERNAL OUTPUT
Output to external output selected in
[OUTPUT SELECT].
b Notes
• The [QFHD REC OUTPUT] settings are
enabled only when the file format is XAVC
QFHD.
• The picture being recorded is not displayed on
the viewfinder/LCD screen when [QFHD REC
OUTPUT] is set to [EXTERNAL OUTPUT].
Also, [NIGHTSHOT LIGHT] is set to [OFF].
• The picture is output to the viewfinder/LCD
screen when recording and streaming, even
when set to [EXTERNAL OUTPUT].
• If recording in XAVC QFHD is started with
[QFHD REC OUTPUT] set to [EXTERNAL
OUTPUT], then [LCD BRIGHT] is set to
[NORMAL].
• Any one of the following functions can be used
while recording in XAVC QFHD.
– QFHD REC OUTPUT
– FACE DETECTION
– Proxy recording (however, not supported
when all the conditions below are met)
• When
(REC/OUT SET) t [REC SET]
t [REC FORMAT] is set to 100Mbps
• When (REC/OUT SET) t [REC SET]
t [SIMUL/RELAY REC] is not set to
[OFF]
• The power consumption will increase when SDI
output is selected, reducing the shooting time
using the battery. The camera body may become
warm with use — this is normal.
Setting the file format and
recording format
Recording in MPEG HD
Setting the output destination
when recording in 4K mode