Sony a6400 Mirrorless Camera - Manual (Page 22)

22
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (V series) with the
supplied AC Adaptor.
b Note
• You can use an NP-FV100A large capacity
battery pack (sold separately) with your
camcorder. You cannot use an NP-FV50A.
1
Close the LCD screen and store
the viewfinder before attaching
the battery.
2
Connect the AC Adaptor and
power cord from the camcorder
to an outlet.
The CHG lamp lights up and charging
starts.
When charging ends
The CHG lamp turns off when the battery is
fully charged.
Disconnect the AC Adaptor from the DC
IN jack.
z Tip
• You can check the remaining battery life with
the status check function (p. 68).
To remove the battery pack
Turn the power off, then slide the BATT
release lever to release the battery.
Battery
Power cord
DC IN jack
DC plug
To power outlet
AC Adaptor