Sony a6400 Mirrorless Camera - Manual (Page 32)

32
z Tips
• The picture aspect ratio is fixed to 16:9.
• For details about changing the screen display during recording, see page 67.
• For details about screen display during recording, see page 18.
• The recording lamps can be set to stay off ([REC LAMP], p. 130).
• See page 153 about the recording time of movies.
Insert memory cards each in both slots A and B so the camcorder switches memory card A (or
B) just before the remaining space on the other one runs out, and continues recording on the
next memory card automatically.
Make the following setting before recording.
Set
(REC/OUT SET) t [REC SET] t [SIMUL/RELAY REC] t [RELAY REC].
b Notes
• Do not eject the memory card that is currently being used for recording. When replacing a memory card
while recording, replace only the one in the slot whose access lamp is off.
• Even if you press the SLOT SELECT button, while recording movies, you cannot switch the slot currently
being used.
• When the remaining recording time of the memory card being used is less than 1 minute and the other slot
has a recordable memory card inserted, [ ] or [ ] appears on the camcorder screen.
The indicator turns off when the memory card is switched.
• If you start recording on a memory card with the remaining recording time of less than 1 minute, the
camcorder may not be able to relay-record. To relay-record without failing, make sure that the memory
card has more than 1 minute when you start recording.
• Seamless playback of relay-recorded movies with this camcorder is not possible.
• You can combine relay-recorded movies using application software (p. 20).
• The maximum continuous recording time using relay recording is 13 hours for MPEG HD, XAVC (HD/
QFHD), and AVCHD. Recording stops automatically when the maximum recording time elapses.
Continuous recording on the memory cards (Relay Rec)
REC start
Low remaining
capacity
Exchange the recordable memory card
Low remaining capacity
REC end
REC: Recording
Recording (Continued)