Roland BRIDGE CAST Dual-Bus Gaming Mixer - Manual (Page 67)

System Settings
67
Other Settings
These are the settings for the brightness of the indicators on the BRIDGE CAST as well as for what the level meters display.
1. On the menu screen, click the “SYSTEM” tab and set the parameters in the respective menus.
Menu Value Explanation
LED BRIGHTNESS
0–7 Adjusts the brightness of all indicators.
* Even with the minimum setting of “0”, the indicators do not go completely dark.
* In save mode (P.7), the indicator brightness is limited. When in this mode, the brightness
does not go above a certain level even when you increase the setting.
INDICATOR TYPE
Sets what is shown by the CH 1–4 level meters.
LEVEL The volume is always shown.
METER The level meters operate as a level meter that shows the input levels for each channel.
The volume is shown instead when you operate the CH [1]–[4] knobs on this unit.
PHONES GAIN
Normal
Boost 1
Boost 2
When this is set to “Boost 1” or “Boost 2”, this amplifies the headphone volume.
[UPDATE] button
– Updates the system program of the BRIDGE CAST. Click the [UPDATE] button and operate by
following the instructions shown.