About the included usb cable, Usb type-c – Roland BRIDGE CAST Dual-Bus Gaming Mixer User Manual
Page 12
Connecting to Your Computer or External Equipment and Configuring the Settings
12
Connecting to Your Computer or External
Equipment and Configuring the Settings
This section explains how to connect this unit to your computer or external equipment (such as a mic, monitor speakers or tablet)
and how to configure your computer’s device settings.
About the Included USB Cable(P.12)
Connecting to a Computer/External Equipment(P.13)
Configuring the Device Settings on Your Computer(P.16)
About the Included USB Cable
This unit includes two USB cables.
Make sure to use the included USB cables when connecting the USB port to a device (computer, video game console or
iPad/iPhone).
Do not use the included USB cable with any other equipment besides this unit.
USB Type-C
®
to USB Type-C cable
USB Type-C
®
to USB Type-A cable
About bus power operation
This unit can operate on bus power. The unit operates on bus power when it is not connected to a USB AC adaptor (commercially
available).
The unit switches between power modes according to the USB cable (included) that you connect.
USB cable
Power mode
Limitations
Type-C to
Type-C
Full mode
No limitations
Type-C to
Type-A
Save mode
The
(P.67) is limited.
To use this unit without restrictions on functionality, connect a commercially available USB AC
adaptor (at least 5 V/1.0 A) to supply power to the 5V port during use.
●
Use either a commercially available USB cable or the included USB cable to connect to the USB AC adaptor (commercially
available).
●
When connecting an iPad/iPhone to the USB port, connect a commercially available USB AC adaptor (at least 5 V/1.0 A) to
the 5V port. This unit may operate in an erratic manner if you don’t use a USB AC adaptor, due to insufficient bus power.