Roland BRIDGE CAST Dual-Bus Gaming Mixer - Manual (Page 49)

Output Settings
49
Output Settings
This section explains about the audio output settings.
â Editing the Output Audio Settings(P.49)
Editing the Output Audio Settings
This shows you how to set the delay time for the output audio and modify the audio that’s output from the LINE OUT jack and USB
port.
1. On the menu screen, click the “OUTPUT” tab and set the parameters in the respective menus.
Menu Value Explanation
DELAY
Off, On Turns the delay on/off. When this is “On”, the audio output is delayed by the
specified time.
* Delay is applied to the STREAM MIX bus audio that’s output from the USB port.
Correcting timing discrepancies between video and audio
When streaming games on your computer, you might notice that what you see on
the game screen is not in sync with the game sound (the audio signal that’s input
from the BRIDGE CAST to your computer). By applying delay to the audio output, you
can make the timing of the video and audio match.
0.0–1000.0 ms Adjusts the delay time (audio latency).
LINE OUT MODE
This selects the audio to be output from the LINE OUT jack.
MIC Mic audio (not routed through a bus)
STREAM MIX STREAM MIX bus audio
PHONES SYNC Same audio as the headphones output
USB OUT MODE
(MOBILE/CONSOLE)
When the connection setting for the USB port is “CONSOLE/MOBILE”, this sets the audio that’s output
from the USB port.
MIC Mic audio (not routed through a bus)
STREAM MIX STREAM MIX bus audio