Roland BRIDGE CAST Dual-Bus Gaming Mixer - Manual (Page 40)

Adjusting the Game Sound
40
Adjusting the Game Sound
This section shows you how to adjust the game sound (input source: GAME *1 ) that’s input from the USB port.
*1: When the connection setting for the USB port is “CONSOLE/MOBILE”, the input source is “USB”.
â Using the Equalizer to Adjust the Game Sound(P.40)
â Saving the Equalizer Settings as a Preset(P.42)
â Exporting an Equalizer Preset File(P.45)
Using the Equalizer to Adjust the Game Sound
You can use the equalizer to adjust the tonal character of the game sound (input source: GAME *1 ). This lets you emphasize
important frequency ranges in the game or de-emphasize unnecessary frequency ranges.
For instance, you can use this to suppress the sound of wind or other environmental noises during an FPS game, or make sounds
like footsteps or gunshots easier to hear.
*1: The equalizer is only applied to the game sound that’s sent to the PERSONAL MIX bus. When the connection setting for the USB
port is “CONSOLE/MOBILE”, the input source is “USB”.
1. On the menu screen, click the “GAME” tab to adjust the equalizer.
Menu Value Explanation
EQ Off, On Turns the equalizer on/off.
DETAIL Off, On When this is on, you can set the center frequency and the Q (the frequency bandwidth).
Gain (vertical sliders) -12–+12 Sets the amount of boost/cut for each frequency band.