Installing the bridge cast app and driver, Installing the bridge cast app and driver(p, Ãwindows users – Roland BRIDGE CAST Dual-Bus Gaming Mixer User Manual
Page 10: Downloading the bridge cast app, Installing the bridge cast app
Installing the Dedicated App and Driver
10
Installing the BRIDGE CAST App and Driver
To operate this unit and configure its settings, install the “BRIDGE CAST” dedicated app on your computer.
A dedicated driver must be installed to connect this unit to a computer and to handle multiple audio sources.
USB connection setting switch
Driver
USB input/output
PC
Dedicated driver
Audio: 4 in/3 out, MIDI
CONSOLE/MOBILE
Standard OS driver
Audio: 1 in/1 out
Ã
Windows users
Downloading and installing the dedicated app and driver
1.
Set the USB connection setting switch on this unit to “PC”.
2.
After booting up your computer, connect this unit to the computer with the included USB cable (Type-C
to Type-C, or Type-C to Type-A).
This unit automatically turns on, and the indicators on the operating panel light up.
The dedicated driver is then downloaded automatically via the Internet, which completes the installation.
Downloading the BRIDGE CAST app
1.
Launch your browser and access the following website.
2.
From the downloads page, search for “BRIDGE CAST APP Ver.xxx for Windows” and click on the link.
“xxx” indicates the version number.
3.
Follow the onscreen instructions to download the BRIDGE CAST app.
Installing the BRIDGE CAST app
1.
Right-click on the compressed file that was downloaded, and select “Extract All”.
2.
Open the decompressed folder and double-click on the “Roland_BRIDGE_CAST_Installer.exe” installer.
3.
Follow the onscreen instructions to install the BRIDGE CAST app.
If you see a User Account Control confirmation message, click “Yes”.