Roland BRIDGE CAST Dual-Bus Gaming Mixer - Manual (Page 6)

Panel Descriptions (on BRIDGE CAST)
6
8. CH [1]–[4] knobs
These adjust the volume of the input sources assigned to each channel.
Set the input sources from “CHANNEL”
Ó “CH.1”–“CH.4” Ó “ SOURCE (P.50)” in the menu screen of the BRIDGE CAST app.
9. CH 1–4 color indicators
These blink when a channel is muted.
You can change the indicator colors. Set this from “CHANNEL”
Ó “CH.1”–“CH.4” Ó “LED COLOR” in the menu screen of the
BRIDGE CAST app.
10. CH 1–4 level meters
These indicate the input level for each channel. The volume is shown instead when you operate the CH [1]–[4] knobs.
You can disable the level meters so that only the volume is shown. The level meter display setting is in the menu screen of
the BRIDGE CAST app, accessed from “SYSTEM”
Ó “ INDICATOR TYPE (P.67)”.
11. CH 1–4 bus selection indicators
These indicators light up and go dark to indicate which bus each channel operates.
Select the bus used for each channel by using the bus selection buttons.
Lit STREAM MIX bus
Unlit PERSONAL MIX bus
When the input source is “MIC” (mic audio)
The buses are switched as followed.
Lit STREAM MIX bus –
Unlit
PERSONAL MIX bus Set which bus to use in the level meter screen (P.26) of the BRIDGE CAST app.
Mic audio (not routed through a bus)
12. MUTE/ASSIGN [1]–[4] buttons
Use these buttons to mute the audio and to execute the functions assigned to the buttons.
Set the functions for the MUTE/ASSIGN [1]–[4] buttons from “CHANNEL”
Ó “CH.1”–“CH.4” Ó “ MUTE/ASSIGN (P.51)”, in the
menu screen of the BRIDGE CAST app.
MUTE/ASSIGN 1–4 indicators
These indicators go dark when the mute function assigned to the MUTE/ASSIGN [1]–[4] buttons is turned on.
13. [STREAM] knob
Adjusts the STREAM MIX bus volume that’s output from the USB port.
14. [LINE OUT] knob
Adjusts the volume of audio that’s output from the LINE OUT jack.
15. [MIX LINK] button
Links/unlinks the two buses (STREAM MIX, PERSONAL MIX). When linked, the button lights up.
When the link is on, you can adjust the input level while retaining the volume balance for each bus.
When the input source is “MIC”, the MIC audio (not routed through a bus), STREAM MIX bus and PERSONAL MIX bus are
linked.
16. Bus selection buttons
These buttons switch between the buses (STREAM MIX, PERSONAL MIX) to be used. The buses to be output to
headphones/headset change at the same time.
The buttons light up and go dark to indicate which bus is being used.
Lit STREAM MIX bus
Unlit PERSONAL MIX bus
The CH 1–4 bus selection indicators also light up or go dark in tandem.
17. [PHONES] knob
Adjusts the volume of the headphones/headset.
You can change the maximum volume of the headphones/headset.
Set this from “SYSTEM”
Ó “ PHONES GAIN (P.67)” in the menu screen of the BRIDGE CAST app.
* Change this setting only after turning the headphones/headset volume all the way down.