Roland AIRA VT-4 Voice Transformer - Manual

1
Owner’s Manual
© 2018 Roland Corporation
Before using this unit, carefully read the leaflet “USING THE UNIT SAFELY” and “IMPORTANT NOTES.” After reading, keep the document(s) where it will
be available for immediate reference.
[VOLUME] knob
Adjusts the volume of the LINE OUT jacks
and the PHONES jack.
[MIC SENS] knob
Adjusts the input sensitivity of the mic
connected to the MIC IN jacks (front/rear).
[ROBOT] button
Transforms your voice into that of a robot,
with a fixed pitch and an expressionless
character.
[MEGAPHONE] button
Gives your voice a distorted character as if
you were speaking through a megaphone.
PEAK indicator
Lights if the mic input level is excessive.
Use the [MIC SENS] knob to adjust the
sensitivity so that this indicator lights
occasionally.
[MANUAL] button
Applies the current settings of the sliders
and the [AUTO PITCH] knob to the sound.
[BYPASS] button
Disables the effects (including reverb).
[KEY] knob
Specifies the key used when applying the
effect of the [ROBOT] button or the [AUTO
PITCH] knob (p. 5).
Panel Descriptions