Operating panel settings (on the bridge cast), Configuring how the operating panel works, Source – Roland BRIDGE CAST Dual-Bus Gaming Mixer User Manual

Page 50: Mute/assign

Operating Panel Settings (on the BRIDGE CAST)

This section explains about the settings for the operating panel of this unit.

Configuring How the Operating Panel Works

Here’s how to select the input source controlled by the CH [1]–[4] knobs on the BRIDGE CAST, and the functions that are executed

by the MUTE/ASSIGN [1]–[4] buttons.

You can also change the color of the CH 1–4 indicators.

On the menu screen, click the “CHANNEL” tab, select a channel using the “CH.1”–”CH.4” tabs, and set
the parameters in the respective menus.

Menu

Value

Explanation

SOURCE

This selects the input source that’s assigned to each channel.

Use the CH [1]–[4] knobs on the BRIDGE CAST to change the volume of the assigned input source.

MIC

The audio of the dynamic mic, condenser mic connected to the MIC jack, or the audio of the

headset mic connected to the PHONES/HEADSET jack

When this is set to “MIC”, you must select the mic type.

(P.28)

AUX

Audio input from the AUX jack

CHAT (*1)

GAME (*1)
MUSIC (*1)

SYSTEM (*1)

USB (*2)

Audio input from the USB port

SFX

Sound effects (SFX A, SFX B, SFX BEEP)

LED COLOR

–

Sets the color of the CH1–4 indicators.