ProSoft Technology 5201-DFNT-104S - Manual (Page 92)

104S v2 ♦ ProLinx Gateway Diagnostics and Troubleshooting
(Firmware v2.xx) Protocol Manual
Page 92 of 157
ProSoft Technology, Inc.
4.1.2 Using the Diagnostic Window in ProSoft Configuration Builder
To connect to the gateway’s Configuration/Debug serial port,
1 Start PCB, and then select the gateway to test. Click the right mouse button
to open a shortcut menu.
2 On the shortcut menu, choose D IAGNOSTICS .
This action opens the D IAGNOSTICS dialog box.
March 19, 2010