Data communication, Group communication – ProSoft Technology 5201-DFNT-104S User Manual
Page 70
104S v2 ♦ ProLinx Gateway
IEC-60870-5-104 (104S) Protocol Implementation
(Firmware v2.xx)
Protocol Manual
Page 70 of 157
ProSoft Technology, Inc.
3.5
Data Communication
3.5.1 Group Communication
As previously discussed, the Group parameter in the gateway configuration file
controls how each monitored point is transferred between the 104S v2 gateway
and the client unit. The Group parameter is described in detail in Group Codes
(page 36)
The following example configures this point to be repeated either during cyclic
polls, or when a General Interrogation request for Group 1 occurs.
March 19, 2010
This manual is related to the following products: