Database configuration, Network menu, Transferring wattcp.cfg to the gateway – ProSoft Technology 5201-DFNT-104S User Manual
Page 102
104S v2 ♦ ProLinx Gateway
Diagnostics and Troubleshooting
(Firmware v2.xx)
Protocol Manual
Page 102 of 157
ProSoft Technology, Inc.
Database Configuration
From the IEC-870-5-104 Server Menu press [@]
to display the Database
Configuration screen. It displays the number of configured points and the event
configuration for each data type:
4.1.6 Network Menu
The network menu allows you to send, receive, and view the WATTCP.CFG file
that contains the IP and gateway addresses, and other network information.
Transferring WATTCP.CFG to the gateway
Press [R]
to transfer a new WATTCP.CFG file from the PC to the gateway. Use
this command to change the network configuration for the gateway (for example,
the gateway’s IP address).
Press [Y]
to confirm the file transfer, and then follow the instructions on the
terminal screen to complete the file transfer process.
March 19, 2010