ProSoft Technology MVI56E-DNPNET - Manual (Page 60)

Contents MVI56E-DNPNET ♦ ControlLogix Platform
User Manual DNPNET Ethernet Client/Server Communication Module
Page 60 of 140 ProSoft Technology, Inc.
February 13, 2015
6
Check the new path in the Connection Setup dialog box.
7
Click T
EST C ONNECTION
to verify that the physical path is available. The following
message should be displayed upon success.
8
Click OK to close the Test Connection pop-up and then click C
ONNECT
to close the
Connection Set
up dialog box. The Diagnostics menu is now connected through
CIPconnect.
3.5.2 Using RSWho to Connect to the Module
You need to have RSLinx installed on your PC to use this feature. You also need an ENBT module set up in the
rack. For information on setting up the ENBT module, see Using CIPconnect ® to Connect to the Module (page
51).