ProSoft Technology MVI56E-DNPNET - Manual (Page 45)

MVI56E-DNPNET ♦ ControlLogix Platform Contents
DNPNET Ethernet Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 45 of 140
February 13, 2015
3 Diagnostics and Troubleshooting
In This Chapter
 Ethernet LED Indicators .........................................................................45
 Clearing a Fault Condition .....................................................................47
 Troubleshooting .....................................................................................47
 Setting Up ProSoft Configuration Builder ...............................................48
 Connecting Your PC to the Module .......................................................51
 Using the Diagnostics Menu in ProSoft Configuration Builder ...............62
 Communication Error Codes ..................................................................70
 Connect to the Module’s Web Page ......................................................74
The module provides information on diagnostics and troubleshooting in the following forms:

LED status indicators on the front of the module provide information on the module’s
status.
 Status data contained in the module can be viewed in ProSoft Configuration Builder
through the Ethernet port.
 Status data values are transferred from the module to the processor.
3.1 Ethernet LED Indicators
The Ethernet LEDs indicate the module's Ethernet port status as follows:
LED State Description
Data OFF Ethernet connected at 10Mbps duplex speed
AMBER Solid Ethernet connected at 100Mbps duplex speed
Link OFF No physical network connection is detected. No Ethernet
communication is possible. Check wiring and cables.
GREEN Solid
or Blinking
Physical network connection detected. This LED must be ON solid
for Ethernet communication to be possible.
3.1.1 Scrolling LED Status Indicators
The scrolling LED display indicates the module’s operating status as follows:
Initialization Messages
Code Message
Boot / DDOK Module is initializing