ProSoft Technology MVI56E-DNPNET - Manual (Page 31)

MVI56E-DNPNET ♦ ControlLogix Platform Contents
DNPNET Ethernet Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 31 of 140
February 13, 2015
2.3.2 DNPNET.CONFIG.DNP_Module_Name
Configures the name of the MVI56E-DNPNET.
Tag Name Range Description
DNPNET.Config.DNP
_Module_Name[0] – [79]
0 or 32 - 126 String of ASCII characters (up to 80) that gives
the module a unique name. Terminate the
string with a byte = 0. Module is named
"MVI56E-DNPNET" by default.
2.3.3 DNPNET.CONFIG.DNP3_Server
Configures the MVI56E-DNPNET server.
Tag Name Range Description
DNPNET.Config.DNP3_Server
. Internal_Server_ID
0 to 32767 This is the DNP address for the module. All
messages with this address from the client will
be processed by the module.
DNPNET.CONFIG.DNP3_Ser
ver.Use_WhiteList
0 or 1 This parameter specifies if the IP address of
the host connected to the system will be
validated. If the parameter is set to 0, any host
may connect to the unit. If the parameter is set
to 1, only hosts in the IP list will be permitted to
connect to the module. All other IP addresses
will be ignored by the module and the module
will issue a RST to the TCP/IP connection. The
IP_List is contained in
DNP.Config.DNP_ENET_IP_Addresses.
DNPNET.CONFIG.DNP3_Ser
ver.Binary_Input_Class
0 to 3 This parameter specifies the default class to
be utilized for all the binary input points in the
DNP database that are not defined in the
override list section.