ProSoft Technology MVI56E-MNETCR - Manual (Page 75)

MVI56E-MNETCR ♦ ControlLogix Platform Ladder Logic
Modbus TCP/IP Multi Client Enhanced Communications Module for Remote Chassis User Manual
ProSoft Technology, Inc. Page 75 of 159
June 14, 2011
Command Control Data Object (MNETCRCMDCONTROL)
MVI56E-MNETCR Command Control
Name Data Type Description
ClientIDreq INT Requested Client ID.
CmdQty INT Command Quantity for the Client.
CmdIndex INT[16] Command Index per client. (0 to 15)
IP Address Object (MNETCRIPADDRESS)
This object holds IP address status with set IP & get IP triggers.
Name Data Type Description
IPgetTrigger BOOL Triggers get IP address.
IPreceived INT[4] Displays received IP address.
IPsetTrigger BOOL Triggers set IP address
IPrequested INT[4] Displays requested IP address
3.1.3 Status Object (MNETCRSTATUS)
This object contains the status of the module. The MNETCRSTATUS object is
updated each time a read block is received by the processor. Use this data to
monitor the state of the module at a "real-time rate".
Name Data Type Description
PassCnt INT Program cycle counter
BlockStats MNETCRBLOCKSTATS
(page 76) Block Statistics
CmdBits INT[30] Commands bits array to be used for 30
clients
ClientStatsTrigger BOOL Get Client Status
ClientIDReq INT Client ID requested.
ClientStatus MNETCRCLIENTSTATS[30]
(page 76) Client Status requests
ClientIDRec INT Client ID received.
CmdErrorList INT[16] Command Error List
ClientStatsPending BOOL Allows Get Client Status