ProSoft Technology MVI69-FLN User Manual
Page 91

Reference MVI69-FLN
♦ CompactLogix Platform
FA Control Network Communication Module
ProSoft Technology, Inc.
Page 91 of 137
November 3, 2008
Table name
Size
Description
(10) Manufacture Model name
(10 bytes)
Manufacture Model name , device name
(11) Node name (equipment
name)
(10 bytes)
Node name set by user
(12) Protocol version
(1 byte)
0x80 (fixed)
(13) FA link status
(1 byte)
in-ring / out-ring, etc.
(14) Self-node status
(1 byte)
Node number conflict detection, etc.
Participating Node Management Table
The node status of each node joining in the network is monitored by the
management table held by each node. Regarding the nodes joining the network,
this table handles the data to be managed for each node.
1 At a start, participating node management table and the network
management table is created in accordance with the received token frame.
2 Upon receipt of each token frame, each node updates the participating node
management table.
3 Upon receipt of the participation request frame for new joining, the joining
node management table is updated.
4 When non-reception of a token frame of each node or a timeout is detected 3
times running, the corresponding node is deleted from the table.
Table name
Size
Description
(1) Node number
(1 byte)
1 to 254
(2) Upper layer status
(2 bytes)
RUN / STOP / ALARM / WARNING /
NORMAL
See status block for additional information
(3) Area 1 data top address in
common memory
(2 bytes)
Word address (0 to 0x1ff)
(4) Area 1 data size in common
memory
(2 bytes)
Size (0 to 0x1ff)
(5) Area 2 data top address in
common memory
(2 bytes)
Word address (0 to 0x1fff)
(6) Area 2 data size in common
memory
(2 bytes)
Size (0 to 0x1fff)
(7) Allowable refresh cycle time
(2 bytes)
1 ms. (unit)
(8) Token watchdog time
(1 byte)
1 to 255 (1 ms. Units)
(9) Allowable minimum frame
interval
(1 byte)
1 to 50 (in units of 100ms.)
(10) Link status
(1 byte)
in-ring / out-ring information, etc.
Network management table
This table manages the parameters related to the network status.
Table name
Size
Description
(1) Token holding node number
(1 byte)
Node currently holding a token
(2) Allowable minimum frame interval
(1 byte)
1 to 50 (in units of 100ms.)
(3) Allowable refresh cycle time
(2 byte)
1 ms. (unit)