ProSoft Technology MVI69-FLN - Manual (Page 24)

MVI69-FLN ♦ CompactLogix Platform Start Here
FA Control Network Communication Module
Page 24 of 137 ProSoft Technology, Inc.
November 3, 2008
4 Enter the values shown in the following illustration to define the module
correctly for the MicroLogix processor, and then click OK to save your
configuration.
5 Click Next to continue.
6 After completing the module setup, the I/O configuration dialog box will
display the module's presence.
The last step is to add the ladder logic. If you are using the example ladder logic,
adjust the ladder to fit your application. Refer to the example Ladder Logic
section in this manual.
Download the new application to the controller and place the processor in run
mode. If you encounter errors, refer to Diagnostics and Troubleshooting (page
71) for information on how to connect to the module's Config/Debug port to use
its troubleshooting features.