ProSoft Technology MVI69-FLN - Manual (Page 21)

Start Here MVI69-FLN ♦ CompactLogix Platform
FA Control Network Communication Module
ProSoft Technology, Inc. Page 21 of 137
November 3, 2008
4 When the download is complete, RSLogix will open another confirmation
dialog box. Click OK to switch the processor from Program mode to Run
mode.
Note: If you receive an error message during these steps, refer to your RSLogix documentation to
interpret and correct the error.
5 To verify that the processor is communicating with the module, open the Main
Program folder in the Controller Organization pane in RSLogix, and double-
click MainRoutine. You will be able to see the numbers change in Rung 0 of
the MainRoutine program.
Configuring RSLinx
If RSLogix is unable to establish communication with the processor, follow these steps:
1 Open RSLinx.
2 Open the Communications menu, and choose Configure Drivers.
This action opens the Configure Drivers dialog box.