ProSoft Technology ILX69-PBM - Manual (Page 96)

Contents ILX69-PBM ♦ CompactLogix or MicroLogix Platform
User Manual PROFIBUS Master Communication Module
Page 96 of 124 ProSoft Technology, Inc.
February 4, 2015
Parameter Description Range of
Value/Value
Configuration State
Status Shows whether the ILX69-PBM is configured or not. Configured,
Not configured
Uptime Counts up the time from the last Reset/Power On. Days, hours, minute,
seconds
Network State
Network State Current status of the ILX69-PBM
Operate: Shows whether the ILX69-PBM is in OPERATION
state, e.g. in data exchange in cyclic communication. In a cyclic
data exchange, the input data or the output data of the ILX69-
PBM are transmitted to the slave.
Idle: Shows whether the ILX69-PBM is in IDLE state.
Stop: Shows whether the ILX69-PBM is in STOP state, e.g. no
cyclic data exchange is performed. The ILX69-PBM was
stopped by the CompactLogix program or it changed to the
STOP state because of a bus error.
Offline: Shows whether the ILX69-PBM is not in OPERATION
state, e.g. no cyclic communication is performed. The ILX69-
PBM is in OFFLINE state as long as it does not have a valid
configuration. Operate, Idle, Stop, Offline
Device State
Communicating Shows whether the PROFIBUS DP master executes the
network communication.
Yes: In COMMUNICATION state. The ILX69-PBM exchanges
input/output data with at least one slave.
No: Not in COMMUNICATION state. The ILX69-PBM does not
exchange input/output data with slaves. Yes, No
Running Shows whether the ILX69-PBM has been configured correctly.
Yes: Configuration OK
No: Configuration not OK Yes, No
Ready Shows whether the ILX69-PBM has been started correctly. The
ILX69-PBM waits for a configuration.
Yes: Device is ready
No: Device is not ready Yes, No
Error Shows whether the ILX69-PBM has detected an error.
Yes: Error has been detected
No: No error has been detected Yes, No
Configuration State
Bus ON Shows whether the bus communication was started or stopped
by the CompactLogix program.
Yes: Bus communications have started
No: Bus communications have not started Yes, No
Config Lock Configuration locked shows whether the ILX69-PBM
configuration is locked, i.e. the configuration is protected against
changes.
Yes: Configuration is locked
No: Configuration is not locked Yes, No