ProSoft Technology ILX69-PBM - Manual (Page 27)

ILX69-PBM ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS Master Communication Module User Manual
ProSoft Technology, Inc. Page 27 of 124
February 4, 2015
4.3.2 Installing the ILX69-PBM Module
A detailed description the installation of communication modules in
CompactLogix™ systems can be found in the installation manual for the
1769 CompactLogix™ controller from Rockwell Automation.
1 Install the ILX69-
PBM into a free slot in the CompactLogix™ controller. Make sure it is
within 2 slots of a power supply.
2 Check that the bus lever of the ILX69-PBM is in the unlocked (fully right) position.
3 Assemble the ILX69-
PBM and the CompactLogix™ module together by using the upper
and lower tongue-and-groove slots.
4 Move the ILX69-PBM back along the tongue-and-groove slots until the bus connectors
line up with each other.
5 Move the ILX69-PBM bus lever fully to the left until it clicks. Ensure it is locked firmly in
place.
6 Attach and lock an end cap terminator to the ILX69-PBM by using the tongue-and-
groove slots as before.
7
Apply power to the Rockwell CompactLogix™ controller.
4.4 Uninstalling ILX69-PBM Hardware
1 Adhere to the safety precautions.
2
Shut off the power of the Rockwell CompactLogix™ controller.
3 Discharge yourself.
4 Unlock the end cap bus terminator.
5 Remove the end cap terminator from the ILX69-PBM by using the tongue-and-groove
slots.
6 Move the ILX69-PBM bus lever in the unlocked (fully right) position.
7 Remove the ILX69-PBM along the tongue-and-groove slots.
8
Reassemble the end cap terminator and the CompactLogix™ system together by using
the upper and lower tongue-and-groove slots.