ProSoft Technology ILX69-PBM - Manual (Page 87)

ILX69-PBM ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS Master Communication Module User Manual
ProSoft Technology, Inc. Page 87 of 124
February 4, 2015
DPV1 Alarm Response
This message is used to send a DPV1 Alarm Response to a slave device. The message
acknowledges the alarm when the appropriate indication appears in the DPV1 Alarm
indication area. The information mapped to this area must be used in the DPV1 Alarm
Response message in order to process the alarm properly. The mapping of this information
is as follows.
ILX69PBM.CONTROL.DPV1.Alarm.Request.
Parameter Data Type Value Description
Status DINT 0x0000 ILX69-PBM Status
Command DINT 0x221C Command code
SlaveAddress SINT 0 to 125 Slave address causing the alarm
AlarmType SINT 0 to 255 Type of alarm
SlotNumber SINT 0 to 255 Slot number of slave causing the alarm
Specifier SINT 0 to 255 Alarm specifier
Function SINT 0 Reserved, set to 0
Reserved SINT - N/A
ILX69PBM.CONTROL.DPV1.Alarm.Response.
Parameter Data Type Value Description
Status DINT … ILX69-PBM Status. 0 = OK
Command DINT 0x221D Command code
SlaveAddress SINT 0 to 125 Slave address causing the alarm
AlarmType SINT 0 to 255 Type of alarm
SlotNumber SINT 0 to 255 Slot number of slave causing the alarm
Specifier SINT 0 to 255 Alarm specifier
Function SINT 0 Reserved, set to 0
ErrorDecode SINT 0 to 255 A value of 128 indicates a DPV1 error
ErrorCode1 SINT 0 to 255 DPV1 Error code 1
ErrorCode2 SINT 0 to 255 DPV1 Error code 2