ProSoft Technology ILX69-PBM - Manual (Page 104)

Contents ILX69-PBM ♦ CompactLogix or MicroLogix Platform
User Manual PROFIBUS Master Communication Module
Page 104 of 124 ProSoft Technology, Inc.
February 4, 2015
If the firmware update is successful, a Firmware update OK message displays.
5 To complete the update process, click R ESET D EVICE .
 Initiating a device reset causes the device reboot. A reboot will stop all
communications immediately.
 Non-volatile device parameters that have not been saved, such as a temporary IP
address, will be lost during the reset.
 Before you initiate a reset, make sure your system is in an idle state and operating
under maintenance conditions. This will prevent personal injury or system damage.