ProSoft Technology ILX69-PBM - Manual (Page 84)

Contents ILX69-PBM ♦ CompactLogix or MicroLogix Platform
User Manual PROFIBUS Master Communication Module
Page 84 of 124 ProSoft Technology, Inc.
February 4, 2015
Name Data Type Description
SlaveDeactivated BOOL Slave not active
Reserved0...6 BOOL Reserved
ExtendedDiagnostic
Overflow BOOL Slave has a large amount of diagnostics data and cannot send
it all
MasterAddress SINT Corresponding master address
IdentNumber INT PROFIBUS Identification number
Set Slave Control
This request makes it possible to send commands to one or several slaves. This request
makes it possible to do Sync and Freeze functions. The MSG instruction Request /
Confirmation format is as follows.
ILX69PBM.CONTROL.SlaveControl.SetSlaveControl.
Parameter Data Type Value Description
Initiate BOOL 0x0000 Triggers the Get Slave Diagnostic command
Address SINT 0 to 125 Slave address
MSGStatus - - Message Status, see below
SlaveCommand - - Slave Command, see below
MSGStatus - Message Status
Parameter Data Type Description
Done BOOL Message Status is available
Error BOOL Last message was transmitted with an error
DoneCount DINT OK response count
ErrorCount DINT Error message count
SlaveCommand - Slave Command
Parameter Data Type Description
ClearData BOOL Clears output data
UnFreeze BOOL Unfreezes input data
Freeze BOOL Freezes input data
nSync BOOL Neutralizes the sync or unsync command
Sync BOOL Freezes output data until the sync command is neutralized
GroupSelect SINT[8] Group Select, see below.