ProSoft Technology ILX69-PBM - Manual (Page 61)

ILX69-PBM ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS Master Communication Module User Manual
ProSoft Technology, Inc. Page 61 of 124
February 4, 2015
5.5.5 STARTUP.INI File
The STARTUP.INI file contains the following:
1 [Global]
2 Notify=10
3 Restore=always
4 RestorePoint=SDMMC:/backup
Notify=10:
The value for ‘Notify’ is ‘10’. It takes 10 seconds to copy the files from the SD
memory card to the internal flash of the ILX69-PBM.
Restore=always: The second stage bootloader copies the files in any case.
RestorePoint=SDMMC:/backup: All data stored under the backup folder is copied to the
SD memory card.
Note: The STARTUPINI file is automatically created if ‘Store’ and
are used. The user does not need to create this file.
5.5.6 Reset Device to Factory Settings with Memory Card
Using a memory card that has the basic firmware stored on it, the ILX69-PBM can be
restored back to factory settings.
1 Copy the STARTUP.INI file and the backup directory (including all subdirectories) from
the ProSoft Solutions DVD into the root directory of an empty memory card.
2 Prepare the memory card and reset the module to the factory settings as described in
section Project File Backup and SD Card Handling (page 58).