ProSoft Technology ILX69-PBM - Manual (Page 26)

Contents ILX69-PBM ♦ CompactLogix or MicroLogix Platform
User Manual PROFIBUS Master Communication Module
Page 26 of 124 ProSoft Technology, Inc.
February 4, 2015
8 Click Close when installation is complete.
The ProSoft fdt Configuration Manager is now installed. It can be launched from the
Windows Start menu.
4.3 ILX69-PBM Hardware Installation
This section describes how to install/uninstall the ILX69- PBM in a CompactLogix™ system.
4.3.1 Safety Precautions
Obey the following property damage messages when installing, uninstalling or replacing the
ILX69-PBM.
Electrostatically sensitive devices

To prevent damage to the PLC and the ILX69-PBM, make sure that the ILX69-PBM is
grounded via the backplane of the PLC. Also make sure that you are discharged when
you install/uninstall the ILX69-PBM.
Device Destruction

Shut off the power supply of the PLC before you install the ILX69-PBM. Then install or
remove the ILX69-PBM to/from the PLC..
 Use only the permissible supply voltage to operate the ILX69-PBM.
 All I/O signal pins at the ILX69-PBM tolerate only the specified signaling voltage.