PLANET NAS-7450 - Manual (Page 8)

7
LAN1
LAN2
Yellow(10M link)、Green(100M link)、Amber(1000M link)
HD Access LED HD LED(Power/Fault) Description
Red on Green Blinks Powering up
Red On
during access
Green On HDD is being accessed
Red Blinks (Fast) Green Blinks (Fast) RAID building, rebuilding, expanding
Red off Amber on
Volume un-mounted and HDD is ready for being
hot-up plugged
Off Amber Blinks (Slowly)
Disk faulty.
Blinking interval is about 2 seconds
NAS-7450 Rear View
Interface Description
Power Jack Connect the two power supply cord shipped with the system
e-SATA Connect to External hard drive case
RS-232 Connect to UPS
LAN Jack (LAN1)
LAN Jack (LAN2)
These RJ-45 ports support auto negotiating Fast Ethernet
10/100/1000 Base-TX networks. That allows your system to be
connected to an Internet Access device, e.g. router, cable
modem, ADSL modem, through a CAT.5 twisted pair Ethernet
cable.
USB Socket Connect to UPS and external HDD(FAT/FAT32)
PCI-E Port (optional) Connect to Tape Backup or Tape Library or Network card
RS-232
Power Jack
LAN Jack
USB
PCI-E
e-SATA