PLANET NAS-7450 - Manual (Page 11)

10
HDD Access LED HDD ready LED Description
Red on
during access
Green Blinks Power is being accessed
Red on Green Blinks (FAST) RAID building, rebuilding, expending
Off Amber on Volume un-mounted and HDD is ready for
being hot-unplugged
Off Amber Blink (Slowly) Disk fault Blinking interval is 2 second
Off Off Hard disk is absent or SATA
cable is not connected
NAS-7850 Rear View
Interface Description
Power Jack Connect the two power supply cord shipped with the system
e-SATA Connect to External hard drive case
RS-232 Connect to UPS
LAN Jack (LAN1)
LAN Jack (LAN2)
These RJ-45 ports support auto negotiating Fast Ethernet
10/100/1000 Base-TX networks. That allows your system to be
connected to an Internet Access device, e.g. router, cable
modem, ADSL modem, through a CAT.5 twisted pair Ethernet
cable.
USB Socket Connect to UPS and external HDD(FAT/FAT32)
PCI-E Port (optional) Connect to Tape Backup or Tape Library or Network card
Power Jack
e-SATA
RS-232 USB
PCI-E
LAN Jack