PLANET NAS-7450 - Manual (Page 29)

28
9. Input the “NTP Time Server IP Address” if available.
10. Click “Apply” to save the setting.
To disable a LAN port, enter 0.0.0.0 in its “IP address” field. If you happen to disable all LAN
ports and cannot access the administration page, please use the LCD panel to change the IP
address to non-zero values.
4.3 Windows Settings
NAS server using SMB/CIFS protocol- short for Server Message Block/Common Internet File
System, a protocol used by Microsoft to share files, directories and devices with the Windows
client.
You can configure the Windows Network Settings using the following operating mode:
Workgroup Mode: NAS server becomes a member of a workgroup and communicates with
the clients using its internal user database for authentication and do not require other
authentication server present in the network.
Domain Mode: NAS server become member of a domain and communicates with the client
using the user database stored in an authentication server which must be present in the
network. Optionally, you can register the NAS server to the domain. Once registered, the NAS