PLANET NAS-7400 User Manual

Page 72

Text mode
Original mode

Type a folder name into the field provided, check the boxes of the services
you expect to use with this folder and click the Add button. Add more folders
as required.

If finished, please click the Next button to continue the next step.

Step7:

RAID Configuration.

If a RAID Volume already exists on the NAS-7400, information about the
RAID Volume is shown. To change the RAID, you must delete it first and run
the Setup Wizard again.
From the RAID Level dropdown menu, select the RAID level you prefer for
your disk array.
See for more information.
Highlight disk drives in the Free Disks column and click the >> button to
move them to the Disks in RAID column.