beautypg.com

6 enabling and disabling the buzzer, 7 viewing ups status – PLANET NAS-7400 User Manual

Page 107

background image

PLANET NAS-7400 User Manual

104

6.7.6 Enabling and Disabling the Buzzer

The NAS-7400 has a buzzer that sounds when the NAS-7400 is finished

booting and when a problem is detected. The buzzer is enabled by

default.

PLANET recommends that you leave the buzzer enabled.

To disable the buzzer:

i. In the Tree, click on the + beside the Management icon.

ii. Click on the Buzzer icon.

iii. Click on the Disable option button.

iv. Click the OK button.

v. Click the Enable option button and click the OK button to enable the

buzzer.

6.7.7 Viewing UPS Status

If you have an APC Uninterruptable Power Supply (UPS) attached to the
NAS-7400, you can check its status in PASM.
To view UPS status:

See also other documents in the category PLANET Communication: