PLANET NAS-7400 - Manual (Page 37)

PLANET NAS-7400 User Manual
34
On the UNIX/Linux PC with Command Line Interface
i.
Open a terminal window.
ii. Create a new folder for the NAS-7400. Type mkdir NSA7400”and
press Enter.
iii. Mount the NAS-7400. Type mount
192.168.1.194:/Volume1/Public /NAS-7400 and press Enter.
iv. Note that the IP address shown above is only an example. The IP
address you type in your terminal window will be different.
v. Volume1 and Public refer to the default Volume and folder created
during setup. Change to the NAS-7400 directory. Type cd
/NAS-7400and press Enter.
vi. You can now copy files to and from the folder on the NAS-7400.
vii. When you are done with the NAS-7400, type cd; umount
/NAS-7400and press Enter.
On the Linux PC with Graphic Desktop
This procedure is for a RedHat Enterprise Linux 4 configuration. If you run a
different version of Linux, you might have to adapt the procedure. See your
OS documentation.
i.
From the Applications menu, choose Network Servers.
ii. In the Network window, double-click on Windows Network.
iii. Double-click on the NAS-7400 on the network.
iv. Double-click on the folder you want. If this is the first time you
accessed this folder, an Authentication dialog box opens.
v. Type the user name and password in the respective fields, then click
the OK button.