PLANET NAS-7400 - Manual (Page 134)

PLANET NAS-7400 User Manual
131
iii. Be sure the NAS-7400 is properly connected to your network.
iv. The Ethernet Activity LED should be green or blinking green.
v. Be sure that SmartSYNC is looking on the same network where you
connected the NAS-7400.
Power Button, System Status and Ethernet Activity LEDs
Multiple Network Connections
If your PC has multiple network connections, you must verify that
SmartSYNC is looking on the network where the NAS-7400 is installed:
i. Open SmartSYNC.
ii. In the dropdown menu, choose the IP address of the network
interface card connected to the network where you installed the
NAS-7400.
8.10 Solving Network Connection Problems
Most network connection problems are the result of poor connections.
When the NAS-7400 is fully booted and connected to the network, the
Ethernet Activity LED indicates status and activity:

Green – Network link is properly connected

Flashing Green – Network Activity

Dark – No Connection
Power Button
System Status
Ethernet
Activity LED