PLANET NAS-7400 - Manual (Page 109)

PLANET NAS-7400 User Manual
106
6.8 Managing Services
6.8.1 Setting System Date and Time
To set the date and time on the NAS-7400:
i. In the Tree, click on the + beside the System icon.
ii. Click on the Date / Time icon.
iii. Click on the Setup tab.
iv. From the dropdown menus, choose the time and date values.
v. Click the OK button.
6.8.2 Running the Network Time Protocol
You can use the Network Time Protocol (NTP) to set the system date and
time on your NAS-7400 to synchronize itself with an external Time Server.
To run the Network Time Protocol:
i. In the Tree, click on the + beside the System icon.
ii. Click on the Date / Time icon.