PLANET NAS-7400 - Manual (Page 50)

PLANET NAS-7400 User Manual
47
Chapter 4: One Touch Backup
One Touch Backup enables you to make a quick, automated backup of a
selected folder on your PC, at the touch of a button. You can backup the files
in a single folder, multiple folders, or your complete hard disk drive. This
feature works on the Windows PC where you installed the NAS-7400
software.
Note
The NAS-7400 utility and One Touch Backup cannot restore a failed boot
drive in your PC. However, you can use the NAS-7400 utility to save your
system backup file. See your Windows documentation for information
about system backups.
For One Touch Backup to work, you must:

Enable One Touch Backup on the NAS-7400

Create a Backup Schedule in SmartSYNC
Note
Windows does not allow SmartSYNC to access protected folders and files.
If you want to perform a backup, you must first disable protection on your
folders and files.
4.1 Enable One Touch Backup
To enable One Touch Backup on the NAS-7400:

On the Windows PC, start PASM.

In the Tree, click on the “+” button beside the Backup icon and click
on the “Easy Backup” icon.