PLANET NAS-7400 - Manual (Page 102)

PLANET NAS-7400 User Manual
99
6.6.2 Making Network Settings
To make network settings:
i. In the Tree, click on the + beside the Network icon.
ii. Click on the Network Setup icon.
iii. Click on the Setup tab.
iv. Type a name for the NAS-7400 in the Computer Name field.
v. Click on an option button to choose an Internet Protocol option:

Obtain an IP address automatically – Choose this option to let
your DHCP server make the network settings.

Specify an IP address – Choose this option if you want to make
your network settings manually.
vi. If you chose Specify an IP address, enter the following settings in
the fields provided:

IP Address

Subnet Mask

Default Gateway IP Address

Primary Domain Name Server IP Address

Secondary Domain Name Server IP Address
See your Network Administrator for help in making these settings.
Click the OK button to save your settings.
6.6.3 Working with Jumbo Frames
The term jumbo frame refers to a frame on a local area network that is larger
than the standard 1518 byte size. NAS-7400 supports jumbo frames up to
9000 bytes.