PLANET NAS-7400 - Manual (Page 147)

PLANET NAS-7400 User Manual
144
Connection Problems after Restart
If your NAS-7400’s network settings were set to Obtain an IP address
automatically, your DHCP server might assign a different IP address to the
NAS-7400 when you restart the NAS-7400 after is was shutdown for repairs.
This condition does not apply if you assigned your NAS-7400’s IP address
manually.
If you experience network drive or printer connection failures, check the
NAS-7400’s current IP address. If the NAS-7400’s IP address has changed,
your previous network drives and printer connections will no longer work.
Here are two possible solutions:

You may be able to reset the NAS-7400’s IP address manually. Note
that changing the NAS-7400’s IP address may cause an IP address
conflict on your network. Check with your Network Administrator
before taking this action.

If you cannot restore the previous IP address, you must create new
network drives and printer connections.
Power Button
System
Status