PLANET NAS-7100 - Manual (Page 8)

Getting Familiar with your NAS
LEDs
LED Function
Ready/Status Ready (Green)
• ON – Normal operation.
• OFF – No power.
• Blinking – This LED blinking during startup and shutdown.
Status (Amber)
• ON – This LED will be On during the Startup self-test; it will turn
Off once the self-test is completed. If it stays ON, there is a
hardware error.
• OFF – Normal operation.
• Blinking – During a software upgrade, both the Status and Ready
LEDs will blink.
LAN
• ON – Link established.
• OFF – No LAN connection.
• Blinking – Data is transmitted or received via the LAN.
Disk
• OFF - Idle.
• Blinking – Hard disk is being accessed.
Disk Full
• ON - Disk is completely full. No more data can be stored on this
disk
• OFF -Normal operation, disk is not full.
• Blinking - Disk is 98% full (The Buzzer will also beep 3 times.)
USB 1
• ON - USB device connected to the USB port
• OFF - No USB device installed
• Fast Blinking - Data being transferred to or from the USB device
USB 2
• ON - USB device connected to the USB port
• OFF - No USB device installed
• Fast Blinking - Data being transferred to or from the USB device
Page 8