PLANET NAS-7100 - Manual (Page 64)

Changing the IPP Port Settings
After the IPP port is created, you can reach the IPP Port screen via the Windows Port
Settings button:
1. Open the Printers folder (Start - Settings - Printers)
2. Right-click the IPP Printer, and select Properties.
3. Locate and click the Port Settings button (on the Details or Port tab, depending on your
version of Windows).
Using the IPP Printer
The IPP Printer can be selected and used like any other Windows printer, but your Internet
connection needs to be active.
An NAS may be unavailable for IPP printing for any of the following reasons:
• It is powered off.
• The IP Address of the Router/Gateway for the remote LAN has changed.
• The Internet connection used by the IPP Server is down.
• Network congestion causes the connection attempt to time out.
Page 64