PLANET NAS-7100 - Manual (Page 35)

Enable Use this to Enable/Disable the DHCP Server. If you already have a
DHCP Sever, do not enable this feature.
Start Address Enter the beginning of the range of IP Addresses to be allocated by the
DHCP Server.
Finish Address Enter the last address of range of IP Addresses to be allocated by the
DHCP Server.
DNS
A DNS (Domain Name Server) translates Internet addresses (e.g. microsoft.com) to IP
Addresses. Use the same values as on your PC, or recommended by your ISP (Internet
Service Provider).
At least one (1) DNS entry is required if using either the "E-Mail Alert" feature.
Otherwise, the DNS entries may be left blank.
Obtain DNS Server
Addresses from
DHCP Server
Select this if you want to obtain DNS Server Addresses from DHCP
server when DHCP Client is enabled.
Use Fixed DNS
Server Addresses
Select this if you want to specify some DNS Server Addresses.
Primary IP Address of the first DNS Server.
Backup 1 IP Address of the DNS Server to be tried if the first server is busy.
Backup 2 IP Address of the DNS Server to be tried if the second server is busy.
Jumbo Frame
Frame Size The NAS support large frame, you select different frame size for your
need.
Page 35