PLANET NAS-7100 - Manual (Page 14)

Configuring Your NAS
Now that everything is connected and powered on, you are ready to configure your NAS so
that it is accessible to the users on your network.
• This procedure only needs to be done ONCE, by the NAS Server's Administrator.
• Other LAN users should follow the Client PC Setup procedure described in the following
chapter.
Quick Setup with the NAS Wizard
1. Please insert User’s Manual and Utility CD into the CD-ROM drive to initiate the autorun program.
Once completed a menu screen will appear.
2. Click on “Initial Utility” hyper link to initiate the installation. If the autorun program is not process in
your PC, you can click the “Start” button and choose “Run”. (Suppose “E” is your CD-ROM drive).
When the dialog box appears, enter “E:\Utility\Setup.exe” and press enter key. You will see the
dialog box as below. Please click the “Setup” button.
3. After click, you will see the screen as below. The utility will auto search your network and find out
your NAS-7100.
4. A list of all the NAS-7100s on your network will show on the left side. The right side displays details
of the currently selected NAS-7100.
If the desired NAS-7100 is not listed, check the following:
Page 14