PLANET NAS-7100 - Manual (Page 53)

specified time.
• Every Monday, Every Tuesday, ... - Select this to have the
scandisk run once per week, on the specified day.
Use the time fields (hour, minute, am/pm) to specify when the scandisk
operation should be performed.
Standby Use the "Set Hard Disk to standby mode.. " setting to determine if and
when the hard disk drives should be switched to "Standby" mode.
Buttons
Format Disk Use this button to format the disk. This will partition and quick-format the
new disk.
WARNING! This will destroy any data on the disk. Once started, this
process can NOT be halted or reversed.
S.M.A.R.T. • Check - Click this button to run the S.M.A.R.T. check
immediately.
Scandisk • Start - Click the button to start the Scandisk. The Scandisk could
take long time, and the disk is unavailable to users while the
Scandisk is in progress.
• Stop - If a Scandisk is in progress, click this button to terminate
the Scandisk immediately.
Save Click it to save the modifications in this window.
Cancel Restore the settings on the screen to their values after the last "Save"
operation. Clicking "Cancel" has NO EFFECT on any operations in
progress.
View Log View the log messages of disk maintenance.
Page 53