PLANET WSG-404 - Manual (Page 75)

Wireless Subscriber Gateway 75
Click the hyperlink for further configuration. Enter the related information for the primary server
and/or the secondary server (the secondary server is not required). The blanks with red star are
necessary information. These settings will become effective immediately after clicking the
Apply
button.
Server IP: Enter the IP address or domain name of the LDAP server.
Port: Enter the Port of the LDAP server, and the default value is 389.
Base DN: Enter the distinguished name of the LDAP server.
Account Attribute: Enter the account attribute of the LDAP server.
3.2.1.5 Authentication Method - NTDomain
Choose
“NTDomain” in the Authentication Method field, the hyperlink beside the pull-down menu
will become “NTDomain Setting” .