PLANET WSG-404 - Manual (Page 16)

WSG-404 User Guide 16
2.3 Software Configuration
2.3.1 Quick Configuration
There are two ways to configure the system: using
Configuration Wizard or change the setting by
demands manually. The Configuration Wizard has 7 steps providing a simple and easy way to guide
you through the setup of PLANET WSG-404. Follow the procedures and instructions given by the
Wizard to enter the required information step by step. After saving and restarting PLANET
WSG-404, it is ready to use. There will be
7 steps as listed below:
1. Change Admin’s Password
2. Choose System’s Time Zone
3. Set System Information
4. Select the Connection Type for WAN Port
5. Set Authentication Methods
6. Set Wireless – Access Point Connection
7. Save and Restart PLANET WSG-404
To access the web management interface, connect the PC and WSG-404 in advance via the Private
Port of WSG-404. Then, launch the web browser and enter the IP address of the gateway for that
port in the address field then pres
Enter . Default IP address of the default gateway of the Private
Port is https://192.168.2.254 (Note: https is used for a secured connection).
The administrator login page will appear. Enter
default username “admin” & default password
“admin” in the User Name and Password fields. Click Enter to login.