PLANET WSG-404 User Manual

Page 49

Wireless Subscriber Gateway

Server 1~3:

There are 5 kinds of authentication methods, Local User, POP3, RADIUS,

LDAP and NTDomain to setup from.

Server Name:

Set a name for the server using numbers (0 to 9), alphabets (a to z or A to Z),

dash (-), underline (_) and dot (.) with a maximum of 40 characters, all other letters are not
allowed.

Sever Status:

The status shows that the server is enabled or disabled.

Postfix:

Set a postfix that is easy to distinguish (e.g. Local) for the server using numbers (0

to 9), alphabets (a to z or A to Z), dash (-), underline (_) and dot (.) with a maximum of 40
characters, all other letters are not allowed.

Note:

The Policy Name cannot contain these words: MAC and IP.

Black List:

There are 5 sets of the black lists. Select one of them or choose

“None”

. Please

refer to

4.2.2 Black List Configuration

Authentication Methods:

There are 5 authentication methods,

Local

POP3

RADIUS

LDAP

and

NT Domain

to configure from. Select the desired method and click the link

besides the pull-down menu for more advanced configuration. For more details, please refer
to

4.2.1.1~5 Authentication Method

Note:

Enabling two or more servers of the same authentication method is not allowed.

Policy:

There are 3 policies to choose from to apply to this particular server.