PLANET WSG-404 User Manual

Page 34

WSG-404 User Guide

User Authentication:

Choose to enable or disable this function. If

“User Authentication”

disabled, users can access Internet without being authenticated.

Operation Mode:

Choose one of the two modes,

NAT

mode and

Router

mode, by the

requirements.

IP Address:

Enter the desired IP address for the LAN1 & LAN2 port.

Subnet Mask:

Enter the desired subnet mask for the LAN1 & LAN2 port.

DHCP Server Configuration

There are three methods to set the DHCP server:

Disable DHCP Server

Enable DHCP Server

and

Enable DHCP Relay

Disable DHCP Server:

Disable DHCP Server function.

Enable DHCP Server:

Choose

“Enable DHCP Sever”

function and set the appropriate

configuration for the DHCP server. The fields with red asterisks are required to be filled in.

DHCP Scope:

Enter the

“Start IP Address”

and the

“End IP Address”

of this DHCP block.

These fields define the IP address range that will be assigned to the Public LAN clients.

Preferred DNS Server:

The primary DNS server for the DHCP.

Alternate DNS Server:

The substitute DNS server for the DHCP.

Domain Name:

Enter the domain name.

WINS IP Address:

Enter the IP address of WINS

Lease Time:

Choose the time to change the DHCP.