PLANET WSG-404 - Manual (Page 104)

WSG-404 User Guide 104
3.3.2 Privilege Configuration
There are two parts,
Privilege IP Address List and Privilege MAC Address List , can be set.
Privilege IP Address List
If there are some workstations belonging to the managed server that need to access the
network without authentication, enter the IP addresses of these workstations in this list. The
“Remark” blank is not necessary but is useful to keep track. PLANET WSG-404 allows 100
privilege IP addresses at most. These settings will become effective immediately after clicking
Apply .
Note:
Permitting specific IP addresses to have network access rights without going through standard
authentication process at the Public LAN (LAN1/LAN2) may cause security problems.