PLANET WSG-404 - Manual (Page 113)

Wireless Subscriber Gateway 113
3.4.3 Firmware Upgrade
The administrator can download the latest firmware from website and upgrade the system here.
Click “
Browse” to search for the firmware file and click “ Apply” to go on with the firmware upgrade
process. It might be a few minutes before the upgrade process completes and the system needs to
be restarted afterwards to make the new firmware effective.
Note:
1. Firmware upgrade may cause the loss of some of the data. Please refer to the release notes
for the limitation before upgrading the firmware.
2. Please restart the system after upgrading the firmware. Do not power on/off the system during
the upgrade or the restart process. It may damage the system and cause it to malfunction.
3.4.4 Restart
This function allows the administrator to safely restart PLANET WSG-404 and the process should
take about three minutes. Click “
YES” to restart PLANET WSG-404; click “ NO” to go back to the
previous screen. If the power needs to be turned off, restarting PLANET WSG-404 first and then
turning off the power after completing the restart process is highly recommended.
Note:
The connection of all online users of the system will be disconnected when system is in the
process of restarting.